An inspected valuation, often called a full valuation, is one where the Certified Practising Valuer who signs the report inspects the property inside and out before forming an opinion of market value. It is the report we offer for the 1 July 2027 CGT cost base and for larger SMSF holdings. It costs $550 including GST, or $495 if booked before the early-bird closing date.
Where the law stands
As at- ATO valuation guidance for the reset
- pendingOn 19 October 2026 the ATO promised guidance on valuation methods, the types of professional to consider and the records required. Not published as at 17 November 2026.Source ·
The Inspected valuation is one of the report types explained in our guide to property valuation reports. It is a valuation, signed by a CPV.
Inspected valuation
Valuation, signed by a CPV
- Purpose
- CGT cost base (s 112-155 ITAA 1997)
- Valuation date
- Just before 1 July 2027
- Inspection
- Full internal, by the signing valuer
- Signed by
- Certified Practising Valuer (name shown on your report)
Sample layout. The figure is completed by the signing valuer.
What “inspected” means here
An inspected valuation means the valuer who signs the report has been to the property and inspected it in person. Ours is a full valuation: a full internal and external inspection by the Certified Practising Valuer (CPV) who signs.
This is what the Australian Property Institute’s rules require for a report to count as a valuation. Rule 11.2 says a valuation requires a physical inspection by the Primary Valuer, the person who takes responsibility for the opinion. Staff who are not certified valuers may assist but cannot sign as the valuer.1
So the person who inspects is the person who signs. We do not send one person to inspect and have someone else sign. A report prepared without an inspection is a desktop, which under the same rules gives an indicative value only: see our Desktop valuation (CPV-signed, no inspection), which provides an indicative value under API rules and is not for the CGT cost base or court.
What the valuer does
The valuer forms an opinion of market value from what they see at the property and from sales evidence. In practice that means:
- Inspecting the property inside and out: measuring, photographing, and noting its condition, layout, improvements, and anything a record would not show, such as a renovation, a view or a defect.
- Analysing sales evidence: choosing comparable sales, adjusting for differences, and explaining the choice.
- Applying a method with a cross-check. The ATO recommends “(where possible) a secondary or cross-check methodology”.2
- Arriving at a single value, and explaining it.
- Writing the report to the content the ATO lists for a tax valuation, from the purpose and valuation date to the valuer’s qualifications and an independence declaration.23 The sample report page shows the sections.
The ATO describes evidence as gathered “by means such as inspection (as required), enquiry, computation and analysis”.2 An inspected valuation does all four.
Used for
The 1 July 2027 CGT reset
For Australian resident individuals and trusts that still hold an investment property at the end of 30 June 2027, its market value just before 1 July 2027 can become its new starting value for capital gains tax. The law uses the words “market value just before 1 July 2027”; in practice that is the end of 30 June 2027.7
The API recommends a comprehensive inspection report “for a value the tax system relies on”.4 The ATO has not yet said what kind of valuation it will accept for the reset; it promised guidance on 19 October 2026.5 Our inspected valuation is the report we offer for it.
Four things to know:
- Nothing is valued before 1 July 2027. The ATO says taxpayers “shouldn’t obtain one before this date, as a valuation can’t be forward-looking”.5 What you can do now is reserve a place and a price. The signing CPV inspects from July 2027, and the report is delivered within [TBC: delivery window for 2027 reports].
- There is no deadline. The choice between a valuation and the formula is made when you lodge the return for the year you later sell.7
- A valuation is optional. The alternative is the apportionment method, a formula that is still in draft. For some owners the formula may give the better result. Which suits you is a question for your registered tax agent. See valuation vs formula.
- Close to the date is better. The API recommends a valuation “ideally three to four months post 1 July 2027, and at most within two years”.4
Reserve a place and a price. Keep purchase records, renovation receipts and photos of the property's condition.
The value that counts: market value just before 1 July 2027.
The signing CPV inspects and the valuation is prepared. The API recommends ideally within three to four months, and at most two years.
The valuation-or-formula choice is made when you lodge the return for the year of a later sale.
More on the reset in our 1 July 2027 CGT valuation guide.
Larger or complex SMSF holdings
SMSF trustees must value property at market value every year, but the ATO does not require a qualified independent valuer each time. It says trustees should consider one where a property “represents a significant proportion of the fund’s value” or is complex to value.6 For those holdings, an inspected valuation gives the auditor a valuer’s signed opinion based on an inspection. Your auditor decides what evidence is sufficient. See SMSF property valuation.
Other tax events with a current date
Where you need market value as at today, for example for a transfer to a family member or another CGT event happening now, an inspected valuation is a professional valuation at that date. The ATO says professional valuations “are more credible than those provided by someone who isn’t a professional valuer”.3 For a past date, see retrospective property valuation.
What it is not for
- Court and family law. Expert evidence carries duties to the court. Under the Family Law Rules the expert’s duty to the court prevails over any duty to whoever pays, and the report must meet the rules on content.8 We handle this as a specialist valuation, quoted from $650. See family law property valuation.
- Properties over $3 million, commercial or rural property. These are specialist valuations, quoted from $650.
- Building or pest assessment. A valuer notes condition as it bears on value; a valuation is not a building or pest inspection.
Who signs
Every inspected valuation is signed by a vetted contract CPV who inspects the property personally. Where a state requires a valuer to be licensed or registered, the signing valuer is. At launch we value properties in NSW only.
Each signing valuer holds professional indemnity insurance [TBC: confirm the minimum cover and that every contract valuer meets it]. The name and credentials of our Lead CPV will appear here when confirmed [TBC: Lead CPV name and credentials].
The founders of ValueEdge also run a buyers agency. They never form or influence an opinion of value, and we do not value a property their agency has acted on. Read the independence policy.
Penalty protection: what the ATO actually says
The ATO’s statement is this: “Generally, if you engage and properly instruct a professional valuer, you won’t be liable for penalties if we find the professional valuation is deficient.”3
It is administrative guidance, not a statutory safe harbour, and it has conditions. Penalties can still apply if:
- you did not give the valuer correct information
- you or your agent should reasonably have known the value was incorrect, or
- the method rests on “an unsettled interpretation of a tax or superannuation provision or unclear facts”.2
Interest can still apply, and the ATO can still change the value and the tax. The ATO also says “the onus for providing a replicable and defensible valuation remains with you even when a professional is engaged”.2 Our engagement letter covers the six points the ATO lists for properly instructing a valuer.
How it works
- Reserve or order. For the 1 July 2027 reset, reserve a place and a price. For another purpose, order online with the address and purpose.
- A CPV is assigned who is qualified for your state and property type.
- The CPV inspects the property in person, inside and out. For the reset, this happens from July 2027.
- The CPV signs the report, and you download it.
More detail on how it works.
Price, early bird and upgrade credit
The Inspected valuation costs $550 including GST. It is a valuation, signed by a CPV.
- Early bird: $495 including GST if booked before [TBC: early-bird closing date].
- Reservations: a deposit of [TBC: deposit amount] reserves the place and the price, with the balance on delivery. Refund terms: [TBC: refund terms].
- Upgrade credit: if you bought our $195 Market value estimate (not a valuation), you get $100 off an inspected valuation ordered within 60 days. The credit applies to the standard $550 price, not the early bird.
- One total price. No booking fee. No card surcharge: since 1 October 2026 businesses can no longer surcharge Visa, Mastercard, American Express or eftpos payments.9
Turnaround for orders outside the 1 July 2027 reset: [TBC: turnaround for the inspected valuation].
For context, published prices for a full inspection of a standard home ranged from about $399 to $646 in November 2026 (providers’ own published entry prices, checked 17 November 2026; ranges, not quotes). Consumer guides quote $300 to $600.1011 See the property valuation cost guide and our pricing page.
Need an inspected valuation for another purpose now? Send an enquiry.
Frequently asked questions
Must the valuer who signs have inspected the property?
Under API rules, a valuation requires physical inspection by the "Primary Valuer", who takes responsibility for it. Staff without RPV certification can only assist and must not sign as a valuer. An RPV's valuation generally needs review and countersigning by a CPV, except kerbside assessments under the API's restricted assessment memorandum.
Will a professional valuation protect me from ATO penalties?
Generally, yes, if you engage and properly instruct a professional valuer: the ATO says you "won't be liable for penalties" if the valuation is later found deficient. Protection is lost if you gave wrong information, should reasonably have known the value was wrong, or the method relied on unsettled law or unclear facts. Extra tax and interest can still apply.
Can the inspection be done before 1 July 2027?
No. The ATO says taxpayers "shouldn't obtain one before this date, as a valuation can't be forward-looking", and its valuation guide says a prospective assessment "will not be considered reasonable or acceptable". A valuation as at just before 1 July 2027 can only be prepared on or after that date, so the signing valuer inspects from July 2027. You can organise records and photos now.
What should a valuation report for tax include?
At a minimum the ATO expects the purpose and tax provision, scope, asset details, information and assumptions relied on, standards applied, valuation date (flagged if retrospective), inspection date if any, definition of value, method and cross-check, records to replicate the work, a single value, engagement terms, the valuer's identity and qualifications, an independence declaration and the issue date.
What does "properly instruct" a valuer mean?
The ATO lists six things: set out the scope and purpose; acknowledge the valuer's independence; accept the valuer can refuse to report without needed information; give access to premises and records; give all necessary help; and state the fee doesn't depend on the outcome. It's usually done in a written engagement letter.
Why does an inspected valuation cost more than a desktop?
Because the valuer does more. For an inspected valuation the signing valuer goes to the property, inspects it inside and out, measures and photographs it, and reflects its condition in the opinion of value. Under API rules that inspection is what makes the report a valuation. A desktop, with no inspection, gives an indicative value only.
Sources
- Rules of Professional Conduct (effective 1 August 2025) — Australian Property Institute. Accessed 17/11/2026.
- Market valuation for tax purposes — Australian Taxation Office. Accessed 17/11/2026.
- Market valuation of assets — Australian Taxation Office. Accessed 17/11/2026.
- The CGT Changes and Property Valuations: What you need to know — Australian Property Institute. Accessed 17/11/2026.
- CGT reform – guidance and market valuations — Australian Taxation Office. Accessed 17/11/2026.
- Guide to valuing SMSF assets — Australian Taxation Office. Accessed 17/11/2026.
- Treasury Laws Amendment (Tax Reform No. 1) Act 2026 — Federal Register of Legislation. Accessed 17/11/2026.
- Federal Circuit and Family Court of Australia (Family Law) Rules 2021, Part 7.1 — Federal Register of Legislation. Accessed 17/11/2026.
- Card surcharges — Australian Competition and Consumer Commission. Accessed 17/11/2026.
- Property valuation cost guide — Mozo. Accessed 17/11/2026.
- Free property valuations — Finder. Accessed 17/11/2026.